Long Jianhua threw the ball out to see if Chen Ashi was willing to take it. He didn''t want to spend more time on this matter. He just wanted to put the more than 1.8 million in his bag quickly.
In xiangdao, there are still some talents like him.
After so many years of rapid industrial development, there will always be a group of capable people who will show it
The annual salary of 100000 is a very high figure. He now estimates that it is less than 80000.
Another thing he can''t stop is equity, which is one of the bosses
If he wants to run his own business, he may not have enough capital. Now he has a ready-made boss, why not?
As for the personnel and financial rights, when is the boss has the final say?
Indeed, Chen a was a little dizzy and was shocked by long Jianhua''s words.
After long Jianhua drove all the others away and grinded and drilled in front of an old machine tool alone, he went to the office to see the company''s bill of materials and felt unable to see it;
When I went to the production workshop, I saw long Jianhua working there alone from a distance, and then turned around and left; Check the inventory in the warehouse and always count wrong
The two lathes to be refitted are used to process rough lathe column heads. Due to their low efficiency, they can only process 120 or so in 12 hours. Therefore, the operator of the machine is a worker in his 60s.
At this age, ordinary enterprises are unwilling to recruit them, and there is no old-age welfare in xiangdao at this time, so they can earn a little and increase their income.
Even if it was 6 p.m. and he had to get off work in less than two hours, long Jianhua asked the two machines to shut down for transformation, the two workers were still very unhappy.
Twenty stigmas in two hours, ten dollars.
Chen Ashi arranged and left, while long Jianhua told them that today''s output will not be less, but more; Let the two of them leave here and wait outside the workshop until the equipment transformation is completed.
The two of them walked to the door of the workshop with doubts, but they didn''t leave. They put their heads in from time to time.
The refitting of this old machine tool was carried out in factories in China in the 1960s
Why can''t it be popularized, because a machine tool produces more than products of the same specification. Every time we change the variety, we must improve it again.
Prosperity is different from machinery. Each of their machine tools only produces the same product, which is specialized and meets the premise of transformation.
At 19:20, pan Agui took Chen Ashi into the workshop and asked loudly in the roar of the machine, "huazi, when can we finish it?"
Long Jianhua turned his head and responded loudly, "this one will be ready right away, and the other one will be ready before 8 o''clock!"
The two servo motors of this one have been installed, and they will be completed only after debugging the circuit and power supply.
After thinking about it, he asked pan Agui to arrange someone to debug the line and power supply, and install the second one himself.
Debugging people need to be knowledgeable, so there will be no knowledgeable people to see their transformation, and this person is only Chen Ashi.
Chen Ashi has just finished debugging the first one, and long Jianhua''s one has been installed again.
Long Jianhua asked loudly, "boss pan, you can ask someone to come in and study!"
Pan Agui waved and called in the two old workers who operated the machine tool.
Long Jianhua loudly explained the operation precautions to them, and started the lathe after repeating the key points again.
When the power is turned on, the main shaft rotates rapidly, drives the polished rod through the bridge gear, and the worm gear on the polished rod drives the longitudinal cam
"Yi ~"
In the harsh sound of metal cutting, circles of dark blue iron filings rolled up, and a thick column head was cut quickly.
"Click!"
The shift rod pushes the transverse turning tool forward, and the processed column head is cut off; The spring clamp head is loosened, and the surplus material rolls down to the iron box under the spring clamp head.
The lathe continued to operate automatically until the three raw materials on the feeding rack were processed. Long Jianhua smiled, and pan Agui and the two operators were even more ecstatic.
Long Jianhua said to pan Agui, "boss pan, take it and measure it."
Immediately a female worker came over with a vernier caliper, measured it and said, "all qualified!"
Long Jianhua said to pan Agui, "let them operate and see how much can be processed in an hour?"
Pan Agui smiled, "look!"
Long Jianhua asked, "who operates this machine tool, operate it yourself."
An old worker glanced at him gratefully, immediately went to the machine, took out the blank material inside and gently put it on the angle iron shelf for feeding.
Then press the button and the machine starts again
One, two, three, four
The column head is constantly cut and rolled off from the joint of the card head
31、 Thirty two, thirty-three
Pan Agui laughed every time he dropped one.
"Forty one in half an hour!" Pan Agui shouted.
You know, even if the old worker keeps working all the time, he can produce five per hour.
At this rate, he can finish his previous 12 hours of work in an hour and a half.
Pan Agui wanted to see the limit. The old worker also wanted to take the opportunity to produce more. There was no sign of stopping.
Long Jianhua left them alone and called another old worker to start another lathe that had just completed the power supply and circuit commissioning.
This time, long Jianhua no longer operated by himself, but by the old worker himself. He just watched.
"Hum ~"
The sound of rapid rotation of lathe spindle sounds. After the blank rolls to the chuck, the linkage is quickly fixed to the spring chuck.
The two servo motors are started at the same time, the turning tool accurately enters the predetermined position, and the coolant covers the tool head at the first time.
"Yi ~"
Blue and black iron filings fly down from around the workpiece
"Click!"
The first stigma falls into the plate.
"Click!"
The second stigma falls into the plate
"Eighty one an hour!"
Chen Ashi waved his arm and shouted. Unexpectedly, he found that it was quiet around.
Pan Agui nodded and said excitedly, "not only the output increased, but also the noise was much lighter!"
The rest of the machines have stopped, only these two are still working, and the people who control the old machine tools in the workshop are all around.
"These two servants have made a lot of money and produced so much."
“CallLaoYe！ This is designated by the boss. Don''t worry, our will be changed soon. "
At 9:30, all the remaining blanks in the workshop were processed. Pan Agui patted long Jianhua on the shoulder and laughed, "huazi, have a good drink tonight!"
Long Jianhua wiped his hands with a clean rag. "Eat again in the future. I have to go back to Kowloon. There''s no bus. Give me the money for these two first. "
This is an agreement. The money for these two sets will be given after acceptance, and the rest will be paid according to the contract.
Less than $8000 in your pocket, unstable.
Pan Agui laughed, "then I won''t delay you. Ah Ling, give the money to Hua Zai! "
Holding long Jianhua''s shoulder, he walked out.
He''s happy.
After such a transformation, the efficiency of the two machine tools has been greatly improved. The key is to reach an agreement that they can only transform other manufacturers for half a year, which is equivalent to giving him half a year more. How many small enterprises should be destroyed?
Think about it!
Chen Ashi looked at long Jianhua''s back and his eyes were full of admiration.