"This can''t be measured by scale, can it?" Wang Ziqing did not understand Peng Zhi''s remark.


    CNC machine tools are not other industries. What this industry strives for is technology and capital.


    If measured by the production scale, it is estimated that the whole world can not find much to compare with the machinery manufacturers with tens of thousands of people on the mainland. In fact, these mainland machine tool factories can''t even compare with the newly established third rate CNC machine tool factories in Taiwan.


    It is impossible for the mainland government not to know such a thing.


    Or do they think that as long as they get the technical data, they can produce CNC machining centers that can compete with them in a short time?


    Is that possible?


    If so, perhaps these state-owned machine tool factories in the mainland have imitated CNC machine tools imported from all over the world as early as a few years ago!


    CNC machine tools, involving things, is not a little.


    Even these Taiwan CNC machine tool factories have to import from Japan the CNC system used by CNC machine tools, servo motors used to transmit feed and DC stepping motors


    "Many officials on the mainland believe that the quality is not good and can be made up by quantity..." Peng Zhi said faintly and was ready to get up and leave.


    "By the way, Mr. Wang, if you have any action on the mainland market in the future, please inform us first. This time, if the 9327 plant started by 91 heavy industry has not been taken back by the mainland Ministry of industry, it is estimated that it will be difficult for us to gain a firm foothold on the main road. Jiuyi heavy industry now cooperates with Hal heavy industry in the northeast to produce large castings used in the processing center... "When leaving, Peng Zhizheng straightened up and said to Wang Ziqing.


    Thanks to dealing with enterprises in Europe, America and around the world, these enterprises in Taiwan have developed a good habit of collecting competitor intelligence.


    Although the cooperation between Jiuyi heavy industry and Hal heavy industry has not been reported by the mainland media, anyone with a heart can know this from the raw material procurement and logistics of Hal heavy industry.


    "Jiuyi heavy industry has the strength to produce three-axis machining center?" During this time, I have been busy building my own factories in the mainland, and I have not paid much attention to collecting the intelligence of these competitors in the mainland.


    With the existence of Taiwan machine tool Federation, all machine tool enterprises in Taiwan share information on the mainland market. Wanyou group will also inform them of any competitor''s information.


    Taiwan''s machine tool enterprises are also competitive. However, when entering the mainland, their main competitors are these machine tool factories in the mainland. When there is no large-scale occupation of the mainland market, the competition among them will not be too fierce.


    Otherwise, under the pressure of numerical control machine tools in Europe, America and Japan, these enterprises can not spring up like mushrooms. They have established so many brand enterprises in just more than ten years, and have survived and developed strongly in the cracks of the European, American and Japanese markets.


    "It''s not just a three-axis machining center. The young boss of Jiuyi heavy industry still holds the production technology of the simple fourth axis! " They have paid enough attention to Yunfei''s 91 heavy industry, but they did not expect that this small factory, which has been established for more than two years, has made such progress in technology.


    At least, Taiwan''s CNC machine tool plants have encountered difficulties in the research and development of four-axis machining centers.


    Such technology is the key technology of core competitiveness all over the world.


    Most CNC machine tool manufacturers in the world have only ordinary CNC machine tools with three axes and below. Machining centers with four axes and above are only controlled by some large manufacturing companies in Europe, America and Japan, which are traditional CNC machine tool manufacturing powers.


    In this age, it is impossible to buy!


    "We also underestimated our most powerful competitor on the mainland!" Wang Ziqing immediately said with chagrin.


    If he had known this information at the beginning, he would never have put a large number of Taiwan CNC machine tools on the market at a low price after their factories in mainland China had not been built! If the 91 heavy industries were not crippled by the mainland government, their development in the mainland would be a little difficult.


    "Not only did you underestimate them, but I also underestimated them. Since the mainland government purchased several four-axis machining centers from Germany in 1992, it has not been as urgent as before. You know, in terms of the number of troops and equipment needed on the mainland, it is simply not enough without hundreds or thousands of four-axis machining centers. And now they are looking for a five axis Machining Center... "These intelligence are all the information that the staff of Wanyou group in Taiwan have received from the Taiwan government during this period of time.


    Since the mainland''s reform and opening up in the late 1970s, many enterprises in Taiwan, which were greatly affected by the Japanese financial crisis, have found great opportunities in the mainland, roared into the mainland market, used their huge financial strength to open various factories in the mainland, and made use of the rich and cheap labor costs in the mainland, And rich resources rise again among the four little dragons in Asia.


    The mainland''s economic development in recent years has attracted the most capital from Xiangjiang, which is still under the rule of the queen of England, and Taiwan''s capital, which has been clamoring for the founding of the people''s Republic of China.


    In the early years of reform and opening up, it was easiest for the mainland to approve foreign capital, that is, capital belonging to the same ancestor as the mainland.


    With the subsequent weakness of capital in Taiwan and Xiangjiang, the mainland began to increase its efforts to absorb capital around the world and use these foreign capital to stimulate its own economic development. And take this as an opportunity to carry out a large number of domestic infrastructure construction.


    "Five axis machining center, should no country sell it to the mainland now? Although many years have passed since the Toshiba incident, there has been no relaxation in the scrutiny of this aspect in Europe and the United States. Mr. Peng, how should we deal with this situation next? " Wang Ziqing really didn''t expect to encounter such a situation when he first entered the mainland market. If he had known, he should have entered the mainland market earlier.


    "How to deal with it? We can only wait! Now that I''ve done my best, I have to listen to fate in the remaining time! " Peng Zhi said coldly.


    Before entering the mainland market, these enterprises had established an alliance to collectively deal with the accidents in the Chinese market.


    Now, the factory has not been officially put into operation, which has caused the rebound of Jiuyi heavy industry. If the young boss of Jiuyi heavy industry cooperates with those large state-owned machine tool factories, they will be in danger.


    Although they built factories for China''s Chinese mainland market, they advertised China''s own CNC machine tools. However, compared with the local enterprise of Jiuyi heavy industry, there is no advantage at all.


    We can only use the ideas of some mainland officials who think the foreign moon is rounder than China to find a breakthrough.


    Wu Chengfeng fooled around with that Xiangjiang woman every day. He didn''t pay much attention to China''s competitors. He would cry at that time!


    "I have to go back to Taiwan during this time. Your own factory had better speed up a little more and keep pushing the products to the market with our Wanyou group in March..." Peng Zhi looked at the weather outside and got up to leave.


    Taiwan''s CNC machine tool enterprises have built some assembly plants in the mainland. The largest Wanyou factory here has only designed a capacity of 3000 units a year. At present, it simply can''t meet China''s rapidly increasing market.


    He was worried that the young boss of Jiuyi heavy industry would engage in a price war with them, which would be a disaster for enterprises with huge debts!


    "Are you going back to Taiwan?" Wang Ziqing did not expect that Peng Zhi would choose to leave the mainland and return to Taiwan at this moment.


    Is he going back to avoid suspicion or to prepare for the changes in the mainland market?


    "Yes, the morning after tomorrow." After Peng Zhi finished, he left the private room of the teahouse without looking back.


    It''s no conspiracy!


    Peng Zhizhen doesn''t know where Wang Ziqing''s shrewdness in the Taiwan market has gone.


    The 91 heavy duty CNC lathe has stood a large market share in the Chinese mainland market for a short time. Wang Ziqing has given up his own advantages and wants to compete with the 91 heavy industries in the Chinese mainland market for CNC lathe.


    You know, Taiyu''s CNC lathe can only be regarded as the technical level between low-grade CNC lathe and medium-grade CNC lathe in the mainland market. If it is imported, it still has the advantage of import, but once it is produced in China, it is not enough.


    At least, there is no way to compare their production costs with enterprises such as 91 heavy industry. They don''t know the production cost of 91 heavy industry, but xinkaixing, which also belongs to Yunfei''s industry, can know that the production cost of these factories is not higher than that of Taiwan enterprises.


    Lower production costs and higher technology mean more market profits.


    If it is impossible to defeat Jiuyi heavy industry in the machining center, once Jiuyi heavy industry develops, these Taiwanese enterprises who buy production technology from some third rate CNC machine tool factories in Japan or Italy can only seek survival in the gap between large CNC machine tools in Europe, America and Japan and the newly rising Jiuyi heavy industry of Chinese local enterprises in the mainland market.


    China''s CNC machine tool market, low-end market has a lot of capacity to fear the state of the machine tool plant, the highest profit has the production of mid-range CNC machine tools and the 91 heavy industry, and the European and American export machine to China, the highest profit of the high-end CNC machine tools, basically in Chinese mainland, only a handful of strong companies have a small number of exports.


    These Taiwan machine tool factories are reluctant to produce medium-grade CNC machine tools