Peat!
The second artillery has been changed!
This is the second artillery!
China''s most mysterious strategic missile force!
Almost all high-end heavy strategic equipment belongs to this force in management!
This army was piled up with money. Didn''t the country tilt its strategic focus to the economic field? Where did the huge amount of money come from to completely reload the whole army? This is not scientific at all!
What''s new for the second artillery?
Is it JuLang series or Dongfeng series?
It''s rubbish. It''s estimated that it''s Dongfeng series. I just don''t know whether it''s type A, type B or type C of Dongfeng series?
The Second Artillery Corps is a strategic missile force in China. It was not until the cross century that the mysterious veil was revealed at the military parade of the national 50 year celebration.
China''s most deterrent strategic missile, dongfeng-31, has an effective range of 8600 kilometers and an accuracy range of 100 meters. With nuclear warheads, it can cover most cities on the west coast of the United States!
Did all the money saved by the military in these years fall on this dress change?
Since the reform and opening up, the military has engaged in a lot of sidelines. Camart is only one of them. In recent years, camart alone has provided hundreds of millions of funds for the military!
Of course, these big guys at the strategic level burn money very much. Without internal fuel, only some shells and engines cost tens of millions! Of course, if you remove profits and various additional costs, millions can be produced.
"Thousands of kilometers? Boy, you''d better not know about it! " Li Zhongwei said seriously to Yun Fei.
This is a real military secret.
This is the case in any country. When there is no accident, everyone thinks he can afford it. If there is an accident, Li Zhongwei, a big man in the military, can''t afford it. This is the country''s top military secret!
The mysterious veil of the Second Artillery Corps will not be unveiled until the National Day parade in the 50th year of the 21st century.
It was at that time that China''s Dongfeng series appeared in the sight of people all over the world!
"Cut, if you don''t know, you don''t know. Do you cover it like a baby and don''t look at people? Has the range of Lao maozi''s Poplar MD missile reached 14000 kilometers? Is there a secret? Where are they deployed? Every corner of the earth is within their attack range. Don''t you dare to argue with the old maozi who is now too dilapidated to be dilapidated? " Yun Fei tilted his lips.
Many things in China are regarded as a baby pimple.
If we have a strategic missile with a range that can cover the whole world and hide it, others will not take it as a thing at all. If people know that China has this thing, can they not consider it when shouting at China?
Didn''t you see that when these strategic missiles didn''t appear in the sight of the world, did Uncle ohm blow up all the Chinese consulates?
"Do you really intend to export the equipment you currently produce and are still in the development stage to these countries?" In order to divert Yun Fei''s attention and avoid the boy from asking about some national military secrets, Li Zhongwei immediately changed the topic.
"If someone buys it, let''s buy it. Our thing is not advanced! " The equipment developed was originally for sale.
Someone waved a lot of money to buy it. How can Jiuyi heavy industry not sell it?
Don''t you have a problem with yourself?
................................
"Ladies and gentlemen, this is our machining center assembly workshop. According to the plan, within two years, our Jiuyi heavy industry will build an annual production capacity of 2000 processing centers, and the annual turnover will exceed one billion yuan... "We took a group of international friends with different skin colors to visit the newly established constant temperature assembly workshop.
While visiting, I explained each assembly link to these international friends who had only heard of and had not seen high-end CNC machine tools.
Listening to their translation and telling them about their various processes, these international friends did not show much expression of serious listening. They were most concerned about the processing capacity of these equipment.
Due to the small land area, sparse population and weak industrial foundation, their mechanical manufacturing capacity is not very strong, while CNC equipment is the embodiment of a country''s comprehensive national strength. It needs not only a deep industrial foundation, but also many industrial technologies such as electronics, electrical, computer and so on.
They know their own business. For high-end manufacturing equipment such as independent research and development, they know that even if they can get it out, it is impossible to form large-scale production in a short time.
In particular, Iraq and Iran, two of the world''s top military powers, the eight-year war between Iran and Iraq in the 1980s not only lost their high-end combat power, but also set back their industry and economy for decades.
Machinery manufacturing capacity can not be improved in just a few years or decades.
In particular, the training of the most critical skilled workers in mechanical manufacturing needs more time and money.
Not to mention making planes and tanks, at least guns have to be made by yourself!
Just because they can''t make anything, they can''t make anything. After eight years of Iran Iraq war, Iran and Iraq, two rich countries with tens of billions of dollars of deposits before the war, owe hundreds of billions of dollars in arms debts after the war!
In this eight year war, the United States, in particular, wantonly sold various arms and weapons and equipment to both sides of the war, making a windfall. They even recovered from the economic crisis caused by oil in the 1970s by exporting weapons and equipment to these two countries.
If it had not been for the outbreak of the Iran gate incident, neither Iran nor Iraq would have awakened. It turned out that the United States had no good intentions from the beginning.
They are doing the rack, they are consuming weapons and equipment, and finally their treasury is hollowed out by Lao Mi!
How can they not be angry!
It is precisely because of this that, feeling cheated, they will abandon their past grievances and prepare to cooperate in the development of their own industries, especially the military industry.
Originally, they wanted to buy CNC equipment from the United States that could greatly improve their industrial level, but they were rejected by the United States.
Uncle ohm said that buying weapons and equipment is no problem. Except super weapons such as atomic bombs, aircraft, tanks, artillery and even Scud missiles, they can be sold, but if you want to buy a large number of equipment for manufacturing these weapons and equipment, you can''t!
There''s no problem with a few.
But what''s the use of just a few?
What can several CNC lathes do in addition to processing shell connection parts?
Even the engine parts of short-range missiles such as Scud can''t be processed!
Of course, traditional machinery and equipment can also be processed. Don''t you see that we Iranian people are engaged in * * * *? People in Iraq are busy helping Saddam extract oil!
Where can anyone spend decades to improve machining operation technology?
"This is the mechanical test workshop of our Jiuyi Research Institute. Almost all CNC machine tools produced by Jiuyi heavy industry are finalized from this laboratory! The big guys being studied here are the heavy CNC lathes jointly developed by Jiuyi heavy industry and Hal heavy industry, the largest heavy general vehicle manufacturer in China. Their main purpose is to process large long axis parts, such as the shell of large missiles... "I know these goods are not very interested in the production workshop, As soon as Wu Zhongda, who had long been inspired by Yun Fei, took these foreign steamed stuffed buns into the mechanical experimental workshop of 91 heavy industry, he introduced the soon to be successfully developed heavy CNC lathe to the defense ministers of countries who wanted to manufacture high-end weapons and equipment.
"Manager Wu, I don''t know what the price of these heavy CNC lathes developed by your company is?" Just after Wu Zhongda said that such a CNC lathe could be used to process the shell of large missiles, several people immediately asked the price through the interpreter around them.
"These equipment were ordered by some production bases of our domestic aerospace system. Because they are useless in the civil market, they are mainly used for the manufacture of large military equipment, so the price is a little expensive..." Wu Zhongda looked at these international friends with embarrassed eyes.
In this way, Yun Fei told him in advance.
The design of strategic intercontinental missiles is very difficult. There are many key technologies in them. It is impossible to design them without long-term experience accumulation. Even if it can be designed, it must have that manufacturing ability.
Missiles do not fly farther with more fuel.
Sometimes, the fuel is loaded too much, and even half of the design range cannot be reached because of the heavy self weight.
However, tactical missiles, if only missiles with a range of tens or even hundreds of kilometers, can be designed by countries with a little capability.
What they lack is only the processing equipment and materials for producing these missiles!
"How much is it?" Wu Zhongda''s mouth cracked and he took a deep breath for several times. He almost suppressed his desire to laugh.
"Because it is impossible to produce on a large scale, if the production quantity of our heavy CNC lathe is less than 100, the cost of each will exceed 2.8 million yuan!" Wu Zhongda said in embarrassment.
Wu Zhongda has long seen the ruthlessness of Yun Fei.
These heavy CNC equipment can''t be seen in the international market.
"Manager Wu, I wonder how long it will take for your CNC equipment to be mass produced?"