Seeing Zhao Xingbang''s firm eyes, Yun Fei knew that there was no room for negotiation.
If they disagree, perhaps the state will exchange this huge order with Taiwan funded enterprises. All along, the country is best at doing this. If Taiwan CNC machine tool company is not willing, perhaps this order will go back to the hands of Japanese or German companies.
Now China''s Chinese mainland has been opening up to four axis machining centers abroad. For the three axis, which is from high-grade to middle grade or even low grade CNC equipment, especially after China''s domestic enterprises can produce, the power producing countries of foreign numerical control equipment have begun to fully open up the Chinese mainland market and use their garbage processing centers to attack the Chinese market. Eliminate China''s domestic road in the bud.
It has been said that as long as there is 100% profit, the capitalists will take risks. If there is 200% profit, the capitalists can not even live.
This fully illustrates the essence of capitalists'' pursuit of profit.
The price of numerical control equipment is high, and the markets of European and American countries have gradually become saturated. Now the largest market is Asia and South America with rapid economic development. There is a blank in the African market. Of course, the countries and organizations in this huge region are busy fighting for territory every day, There is no intention to buy these expensive equipment to develop their industry.
China is the biggest market.
For industrial powers such as the United States and the European Union, CNC equipment is counted in millions. Japan, a small bullet country, also has millions of CNC equipment. China''s domestic CNC equipment is basically blank.
Who doesn''t know how much profit there is?
Otherwise, how can foreign countries, which have always regarded China as the biggest threat, export to China the three-axis linkage processing centers that have been listed as strategic materials and banned from export to China for decades?
China''s national purchase order is more than 200 million US dollars. No company in that country will not be excited!
Therefore, if China exchanges this order for the production technology of the three-axis machining center, there will definitely be a company''s heart.
"All technologies?" Yunfei''s heart is like a knife.
The state not only did not support Jiuyi heavy industry, but forced them to hand over their technology!
But fortunately, at least they didn''t rob directly and threw out a huge order!
"Three axis linkage! It''s just that you have mature technologies for large-scale production and technologies for further development. You don''t have to. " Zhao Xingbang also knew that he had just entered the Commission of science, technology and industry for national defense and was able to lead such a huge investigation team, mainly due to his personal relationship with Yun Fei.
At least, the state also hopes that Jiuyi heavy industry can take out the technology of the three-axis machining center in exchange for this huge order. The state is also unwilling to let Taiwan CNC equipment manufacturers or enterprises in Europe, America and even Japan get such a huge order.
The order is given to Jiuyi heavy industry, which will spend money in China anyway.
If you give orders to Taiwan enterprises or CNC machine tool factories in Europe, America and Japan, the money will be foreign!
"Must be free?" Yun Fei breathed a sigh of relief.
Even with the production technology of three-axis CNC machine tools, the production technology of four-axis machining center and the CNC system with perfect functions have not been obtained. Even if the capital first machine adopts the Dragon CNC system of Huadu CNC, it can only generate a simple four-axis three-axis machining center, and even a real four-axis four linkage machining center can not be produced.
There is no cloud in the capital. It is not such a person from later generations to guide.
In Yunfei world, from the mid-1990s, the capital one machine was able to produce three-axis and two linkage NC milling, to the late 1990s, it was able to produce three-axis and three linkage machining centers, but in the first decade of the 21st century, it was impossible to produce four axis and four linkage machining centers. Finally, because the three-axis machining center has no market competitiveness, it develops towards high-speed milling and produces some light high-speed CNC milling or engraving machines.
Zhao Xingbang did not answer Yun Fei''s words, but shook his head with a smile.
The cloud was not happy in an instant.
As long as it''s not free.
It seems that the leaders of the country have done a very kind job this time.
With such a huge market in China, the 91 heavy industry can''t eat up at all. There''s nothing to pull up an alliance. However, the alliance is the capital''s one machine, but Yun Fei can''t help but resist it.
In this case, Zhu Feng and Liu Cheng of the first aircraft in the capital can''t see the research and experiments, so they can''t see them at all.
Yunfei didn''t talk to Zhao Xingbang about this again. Instead, he directly dealt with Park Yanji in front of him, put his mouth to park Yanji''s ear and whispered.
In full view of the public, Yunfei was so close to herself that a red cloud suddenly rose on Park Yanji''s face. After Yunfei explained, he quickly left the investigation team with a red face.
"Mr. Wu, the spindle of your machining center is produced by yourself?" In the precision machining workshop of Jiuyi heavy industry, Zhu Feng, who had been unable to speak, finally couldn''t help asking his own questions.
In this workshop, there are more than ten CNC lathes without safety guards produced by 91 heavy industry. As the chief engineer of capital No. 1 Machinery Co., Ltd., he doesn''t come out. These spindles are the precision spindles used in the machining center.
At this time, they have understood how far there is a gap between the capital Yiji and the newly established private enterprise Jiuyi heavy industry.
The spindle of NC milling produced by their company is imported from Taiwan! If it were not for the channels of Taiwan CNC equipment production company, they would not soon hook up with Peng Zhi of Wanyou CNC group from Taiwan.
"Yes, so far, except that the servo motor is imported from erling company and Fuji company in Japan, including roller lead screw pair and sliding guide rail, these are produced independently. After our own servo motor is studied, the CNC equipment produced by 91 heavy industry has been completely made in China!" Wu Zhongda didn''t know Zhu Feng. He thought the goods were also a big leader and proudly introduced them.
"Unlike those shameless enterprises, in addition to producing some of the most basic parts, the key parts are imported from abroad. We are just assembling. Unexpectedly, we have the good intention to claim our own brand and completely domestic! You have a thick skin! Even our Jiuyi heavy industry doesn''t dare to publicize to the outside world. It''s completely domestic... "
Wu Zhongda''s words immediately turned Zhu Feng''s old face red.
Liu Cheng sighed.
It is estimated that Yunfei knew he was coming with Zhu Feng and asked Wu Zhongda to say so on purpose.
This is not only said to these big men, but also to the person in charge of the first aircraft in the capital and Zhu Feng, the chief engineer.
This also scolded all domestic CNC machine tool manufacturers.
The localization of medium and high-grade CNC equipment such as machining centers and CNC lathes is a wound in the hearts of all Chinese people.
At present, Chengdu xinkaixing, the only company in China that can produce ball screws and supporting ball bearings, is originally supporting Jiuyi heavy industry. The products are not enough to supply Jiuyi heavy industry, and it is even more impossible to accept orders from other companies.
The only key spare parts such as roller lead screw pair, servo motor, precision slide rail and precision spindle that capital first machine can produce are precision slide rail, and it is also the lowest level hard rail in the slide rail!
"Mr. Wu, could you please tell us in detail about the production technology of the precision spindle produced by your company? What materials are used? " At the moment, Zhu Feng couldn''t care to blush. They had been developing the main shaft for a long time in the capital, but they couldn''t get it out at all because the materials didn''t pass the customs.
That is, the better 40Cr in China is used. According to some technical documents obtained abroad, after heat treatment, the surface hardness of the spindle can reach HRC50, which can not support the whole spindle to maintain stability in the long-term cutting process.
Even, when heavy load cutting is carried out, the spindle will wear out before long.
Hearing the old man asking such a professional question in front of him, Wu Zhongda stared at him with vigilance and could not care about the introduction. Seeing the old man staring at him with expectation on his face, he suddenly had a bad hunch in his heart and turned to look at Yun Fei on one side.
"Lao Wu, this is the chief engineer of the capital first aircraft, Zhu Feng and Zhu Zong." After knowing the details from Zhao Xingbang, Yunfei, who has a bottom in his heart, is not worried that these key technologies will be learned by them.
"Mr. Zhu, the spindle used in our machining center is made of 30crmosia and 38CrMoAl. 30crmosia, some military factories have a small amount of production, and some are imported on the market. However, the price is a bit killing people. It costs tens of thousands per ton! Materials like 38CrMoAl, like superalloys and titanium alloys, are strategic materials and are not exported to our country... "Yun Fei said to Zhu Feng with a smile.
30crmosia is an alloy structural steel, which is mainly used for some high-strength and high load shafts. Now, when China is not able to reduce production costs due to mass production, it is mainly used for military industry, especially naval ships, such as the transmission gear in the gearbox and the main shaft in the gearbox.
Of course, some key parts of guns and guns began to use this material gradually.
38CrMoAl, also an alloy structural steel, has better material properties than 30crmosia, but the production cost is higher and the proportion is not easy to grasp. In the 1990s, it was a special alloy material that restricted exports to China.
These two materials are not only expensive, but also difficult to process in China, where tool materials are also limited.
The spindle of the machining center has high requirements not only for materials, but also for heat treatment process and machining process.
Before rough machining, forging must be carried out, and then the first heat treatment. After turning, the second heat treatment and aging treatment must be carried out, and then a series of complex processes such as semi finishing, finishing and grinding
"..." hearing Yun Fei''s words, Zhu Feng, Liu Cheng and several other leaders of the Ministry of industry took a breath.
It seems that what Jiuyi heavy industry has is not only the technology of machine tools, but why does no one know that they have made great achievements in materials?
"These two materials can only be produced on a small scale by our Jiuyi heavy industry, and can not even meet our own use!" Yun Fei politely rejected Zhu Feng''s or Liu Cheng''s impending request for such a reason.
The formula and production process of this material were made only after hundreds of tons of materials were refined and discarded in the smelting workshop of 91 heavy industry. Even now, it still can not be produced on a large scale.
After the first round of equipment upgrading, the main production of 91 materials is the production of these two kinds of materials, which can not be produced by domestic steel mills, or even have not heard of such materials at all! Since the military needs to change its equipment, the production of 30crmosia is enough to bring the 91 material back to life.
Don''t think that the tool factory can''t produce steel!
However, it is very difficult to produce this material in September 1.
Jiuyi material is located in Chengdu. If you want to produce steel products with high energy consumption and high pollution, even if the Chengdu city government agrees now, with the development of Chengdu, it can only be closed or relocated in the end!
There is no other choice.
Therefore, this makes the cloud non investment plan subject to twists and turns.
"Xiao Yun, when can you produce these materials? Why don''t I know? " Zhao Xingbang didn''t expect that Yun Fei was the boy who had a hand in everything!
And quietly succeeded!
"You didn''t ask me! Besides, these materials, which can be produced by your military, can''t even be guaranteed for your own use. It''s impossible to provide them to private companies like us. The imported materials are too expensive to produce by yourself. What can we do? " Yun Fei said with a lonely expression.
He deliberately said that his company could produce these two materials that could not be produced on a large scale in China.
Isn''t the state forcing me to hand over my technology?
You have to charge some interest!
If you don''t have a strong card in hand, it''s not easy for Yun to open his mouth to the lion in the process of transferring the production technology of the processing center to the first machine in the capital.
Therefore, he must let these guys who can make decisions on behalf of the country know that they still have a better hand.
Materials are more important to the country than CNC equipment!
Especially some high-performance alloy materials with a wide range of military applications!
China''s industrial development is not only restricted by the level of machinery manufacturing, but also by materials!
Materials and manufacturing technology complement each other!
No matter how powerful the manufacturing technology is, it is useless without high-performance materials.
With high-performance materials and without supporting processing technology, it is impossible to turn materials into high-precision products, which is also useless!